crypto/fips/fips_post.c:235: FIPS self test failure
[ 1.607336] piix4_smbus 0000:00:07.3: SMBus Host Controller not enabled!
[1;37mBOOT FAILED![0m
This Live System image failed to boot.
Please file a bug against the 'live-boot' package or email the Debian Live
mailing list at <debian-live@lists.debian.org>, making sure to note the
exact version, name and distribution of the image you were attempting to boot.
The file [1;37m/boot.log[0m contains some debugging information but booting with the
[1;37mdebug[0m command-line parameter will greatly increase its verbosity which is
extremely useful when diagnosing issues.
live-boot will now start a shell. The error message was:
Unable to find a medium containing a live file system
BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) [6n
[新会话] @胡图图,This error message suggests that the system failed to boot due to a self-test failure in the FIPS (Federal Information Processing Standards) cryptographic module and a problem with the SMBus (System Management Bus) Host Controller.
The FIPS self-test failure may indicate a problem with the cryptographic module's implementation or configuration. FIPS is a set of standards that specify requirements for cryptographic modules used in computer systems by US government agencies and contractors. The FIPS self-test is a validation process that ensures the cryptographic module operates correctly and securely.
The SMBus Host Controller not being enabled could be the cause of the issue. SMBus is a communication bus used to manage devices in a computer system, including temperature sensors, power supply sensors, and fans. If the SMBus Host Controller is not enabled, it can prevent communication with these devices, leading to system instability or failure.
The error message suggests filing a bug report against the 'live-boot' package or emailing the Debian Live mailing list for further assistance. The '/boot.log' file may contain useful debugging information, and increasing verbosity with the 'debug' command-line parameter may help diagnose the issue.
The system has started a BusyBox shell, allowing for further troubleshooting and system recovery.
@胡图图,会话已结束
[新会话] @胡图图,This error message suggests that the system failed to boot due to a self-test failure in the FIPS (Federal Information Processing Standards) cryptographic module and a problem with the SMBus (System Management Bus) Host Controller.
The FIPS self-test failure may indicate a problem with the cryptographic module's implementation or configuration. FIPS is a set of standards that specify requirements for cryptographic modules used in computer systems by US government agencies and contractors. The FIPS self-test is a validation process that ensures the cryptographic module operates correctly and securely.
The SMBus Host Controller not being enabled could be the cause of the issue. SMBus is a communication bus used to manage devices in a computer system, including temperature sensors, power supply sensors, and fans. If the SMBus Host Controller is not enabled, it can prevent communication with these devices, leading to system instability or failure.
The error message suggests filing a bug report against the 'live-boot' package or emailing the Debian Live mailing list for further assistance. The '/boot.log' file may contain useful debugging information, and increasing verbosity with the 'debug' command-line parameter may help diagnose the issue.
The system has started a BusyBox shell, allowing for further troubleshooting and system recovery.
@胡图图,内容超过ChatGPT长度限制,请缩短。当前会话已丢失。
[新会话] @胡图图,内容超过ChatGPT长度限制,请缩短。当前会话已丢失。
是哪里有问题
[新会话] @胡图图,这个问题通常意味着你的 Debian 系统正在使用未经验证的内核模块。这可能会导致安全问题和系统稳定性问题。
在 Linux 内核中,内核模块必须由系统的私钥签名才能加载,以确保它们是由受信任的源编译的。如果系统检测到一个未签名的模块,它将显示这个警告信息并标记内核为 "tainted"。
可能的解决方法包括:
安装验证模块的公钥。你可以通过安装相应的软件包来获取它们。例如,如果你使用的是 NVIDIA 显卡,你可以尝试安装
nvidia-kernel-dkms
和nvidia-dkms
包。如果你使用的是其他硬件,你应该查找相应的软件包并安装它们。禁用未经验证的模块。你可以编辑
/etc/modprobe.d/blacklist.conf
文件并添加以下行来防止未经验证的模块加载:其中
<module_name>
是未经验证的模块的名称。请注意,在某些情况下,禁用未经验证的模块可能会影响系统的某些功能。因此,在执行此操作之前,请确保你知道你要禁用的模块对系统的影响。
就不动了
是什么问题?
@胡图图,这个问题可能意味着你的 Debian 系统无法正确地识别或挂载 CD-ROM 驱动器。
可能的解决方法包括:
检查 CD-ROM 驱动器是否正确连接并正确识别。你可以在系统启动时按下键盘上的适当按键(例如 F2 或 Del 键)以进入系统 BIOS 设置。在 BIOS 设置中,你可以检查 CD-ROM 驱动器是否已正确连接并被识别。如果你不确定如何检查,可以查看你的计算机制造商的文档或寻求专业帮助。
检查 CD-ROM 驱动器是否正确挂载。你可以尝试手动挂载 CD-ROM 驱动器来检查它是否可用。可以使用以下命令:
如果成功挂载,你应该能够在
/mnt
目录下访问 CD-ROM 驱动器中的文件。如果无法挂载,请检查 CD-ROM 驱动器是否正确连接,并尝试重新启动计算机。禁用 CD-ROM 驱动器。如果你不需要使用 CD-ROM 驱动器,你可以在 BIOS 设置中禁用它。这将避免系统在启动时尝试识别和挂载 CD-ROM 驱动器。
@胡图图,为了防止浏览器卡顿,超过64K的代码将使用文本框显示。
@胡图图,我对你的启动不了不感兴趣,只对你的采集卡感兴趣。